Showing posts with label software. Show all posts
Showing posts with label software. Show all posts

Tuesday, July 08, 2008

Software review:N1MM part two

The last installment, I talked about the N1MM entry window and some of the features of N1MM.

Today I am going to go a little deeper and explain some of the features. I am going to break this review into bite sized pieces so that you dont get bored reading a bunch of stuff at one sitting.

Last entry, I talked about a bandmap feature, N1MM has a bandmap feature that if you are connected to a dx cluster, you can actually see the stations that are spotted along a bandmap of your VFO.



As you can see the dx cluster has populated the bandmap with the calls that have been posted to the cluster. Calls in red are new multipliers. You can hold your mouse over one of the spots and you can see more information.

You can zoom in and out on the bandmap using the [+] and [-] keys. If you click on a callsign, if you have your radio interfaced, your radio will automatically go to that frequency and populate the entry window with the call of that station.

When you complete a QSO and tune off the frequency – the spot’s color code turns to grey, so that you know at a glance that you have worked the station already, and won’t waste time when you come back to that frequency again.

You may say, I don't use packet or dx clusters....well the bandmap is STILL useful. As you S&P your way up and down the band, each station you’ve worked will be marked with a grey self-spot, so you can skip by them the next time even if you have no packet spots.

Right clicking on the band map gives you other options as well



To read more about N1MM's software, please check out http://www.n1mm.com

Credit: N1MM Quick Start Guide

Monday, July 07, 2008

Software review: N1MM Logger part one

This is a review of the freeware contest logging program N1MM.

This is the program I use here at K4SAC for contest logging.

I wanted to do a review on this program, but it is so full featured and robust, you just cant do it in one review. So I am going to break this review up into several chunks.

N1MM logger is one of a few contest logging programs that embrace SO2R/SO2V operation.

The N1MM Logger is a freeware program designed to do contest logging and some general logging. It is not a general logging program with award tracking etc. but is mainly a contest logging program to use with a lot of different supported contests.

There are many features found on the N1MM logger.
1) Digital Voice Keying
2) Automatic CW generation
3) RTTY support (uses the MMTTY engine)
4) PSK31 and PSK 63 support
5) bandmaps
6)packet window
7)beam heading and sunrise/sunset
8)Check partial
9)Multiplier window
10)telnet support
11)winkey support
12)SO2R/SO2V support
13)statisical reports
14)greyline program
and many other features....

The meat and potatoes of this program is the log entry window.


Below is a screenshot of the log entry window



As you can see the entry wndow is jampacked with information
As you type in the call of the station you are working, you see the bearing, the milage, and the long path at the bottom of the entry window

The color of the station callsign tells you what kind of multiplier it is.
If the callsign is RED, it is a Single Multiplier Example: CQWW - qso is either zone or country multiplier (one multipliers)

If the callsign is Green, it is a Double or better Multiplier Example: CQWW - qso is a zone and a country multiplier (two multipliers)

If the callsign is Blue it is a new contact.

If the callsign is GREY, it is a Dupe contact or an unworkable station in a non-workable country. This means that you don't need this station because he is a dupe or you are not even 'allowed' to work him in this contest according the contest rules.


You may notice the 2 colored dots right below the Callsign box. Those are to tell you which had RX(recieve) and TX(transmit) focus. Green dot/LED - This VFO/Radio has receive (RX) and keyboard focus. RX and keyboard focus are always together. Red dot/LED - This VFO/Radio has transmit (TX) focus

(Run/S&P) designators are shown. Ru means the station is in running mode, and SP means the station is in S&P mode

At the very bottom you will see the status bar. This information on the left is country, zone, and continent. The middle is QSO's/Multipliers/Zones and the right is the Current score.


Now you may be reading all this and think it is confusing. Once you actually install it and start playing with it, you will find that this program is fairly intuitive and easy to lean. Yes there are a ton of features that take time to learn, but for a small pistol contestor you can get by without 99% of the stuff and just use the program in its basic form.

Bug fixes come fairly fast as there is a Yahoo group that the developers monitor and respond rather quickly.

Stay tuned for part two of this review......

You can find out more by visiting http://www.n1mm.com/

Tuesday, February 12, 2008

CW Skimmer Vs. Contesting

If you are a contester, you have probably heard about this new software package called "CW Skimmer."

There is currently a debate raging about the use of CW SKimmer in contesting.

For those that don't know what CW Skimmer is, the link to it is http://www.dxatlas.com/CwSkimmer/

According to VE3NEA (who has created some truly outstanding ham radio software), CW Skimmer is a :


1) a very sensitive CW decoding algorithm based on the methods of Bayesian statistics;
simulatneous decoding of ALL cw signals in the receiver passband - up to 700 signals can be decoded in parallel on a 3-GHz P4 if a wideband receiver is used;

2)a fast waterfall display, with a resolution sufficient for reading Morse Code dots and dashes visually; the callsigns are extracted from the decoded messages, and the traces on the waterfall are labeled with stations' callsigns;

3) a DSP processor with a noise blanker, AGC, and a sharp, variable-bandwidth CW filter;
4 ) I/Q Recorder and player


Many contesters are being very vocal about this new software and it has certainly sparked a controversy in the contesting arena about its use.

Pete Smith N4ZR wrote an article about its use http://www.pvrc.org/~n4zr/Articles/Skimmer.pdf (You must have adobe acrobat reader installed to read it)

Whether you are for this type of software or against it, one thing is for certain....The face of contesting and dx'ing is about to be changed. Whether it is for good or bad remains to be seen.

73, Jack K4SAC

**********************************************************************************

KR2Q on the Elecraft list serv posted this which pretty much sums up all the arguments you will see against this new software. I won't try to paraphrase Doug, but will copy his post here for you to read.

DOUGLAS ZWIEBEL
Feb 06, 2008; 08:05pm

OK...here it is in a nutshell.
1. CW Skimmer will profoundly change serious-level contesting forever

2. Serious contesters use two radios at once (called SO2R or single op, 2 radios). While they CQ on one band (using a memory keyer...voice or cw), they TUNE a 2nd band, looking for additional contacts, using their 2nd radio. This is very intense contesting and require super-human concentration and skill to be really successful. It means that you are constantly switching focus from the Radio A to Radio B (the switching is automatic, controlled by the contest software).

3. Currently, tuning the 2nd band is a manual process, requiring one to (a) find stations between CQs on the other band, and (b) copy who it is and (c) then decide if you need it or not and if you do, (d) work it while not "losing" your "RUN" frequency (the first radio frequency where you are CQing and working guys who answer your CQs).

4. With CW Skimmer, one no longer has to use their skill to (a) tune the 2nd band and (b) figure out who it is. The computer does this for you....and all at once for the whole band.

5. The entire basis for CONTESTING is competition...a competition of who has the best set of HUMAN skills...skills at using their equipment, but mostly skills at copying callsigns and working guys and tuning a second radio and doing the same. With CW Skimmer, the "second radio" skill is effectively eliminated. The computer does it for you. This is VERY FAR from DSP, or a yagi, or an amp, or an electronic keyer because. Those things made CHORES easier. This thing makes the only human element left (tuning the band and finding callsign) meaningless. It eliminates the HUMAN element. All you need now is a clerk to "point and shoot" or "point and click" whatever you want to call it.

6. With this "tool," a single op can now be SO6R and have a CW SKimmer on every band. Someone will write a script so that multipliers bubble up as found...and even non-mults, but new Q's, will be easily flagged (and worked). YOu wont have to "waste" time tuning and copying the callsign of stuff that you already worked.

7. CW decoders (such as included on Elecraft K3) only copy one signal, which YOU tuned to. This thing does the whole band at once.

8. Yes, it is like an "automatic" packet/internet band-mapping tool, except that use of those places one in the "Assisted" or "unlimited" category, separate and apart from "single op all band." Under the current rules for all contest, the addition of CW Skimmer will NOT cause a change in category away from Single Op All Band to the Assisted or Unlimited category. How could it? Nobody else is helping you get the callsigns.

9. For many, especially those who feel that "packet ruined contesting" or that "packet ruined DXing," this may turn out to be the "packet ruined contesting" of the 21st century. As many have pointed out (if you want to read A LOT on this, go to the CQ-Contest Reflector: www.contesting.com ), with this "tool," there is currently no way to tell if the guy has a 2nd op in the shack, is using packet, or is using CW SKimmer. It makes adjudication a nightmare (probably, impossible).

10. Serious SOAB contesters have long done everything possible to keep their category separate and apart from packet/internet users. They want to keep the category "pure." This will make that job very, very difficult. Why keep it "out?" The same reason sailboat races do not allow engines/motors. The same reason why the Daytona 500 does not allow jet engines to be used. The same reason why people climb mountains instead of taking a helicopter. The same reason why some folks only Bow-Hunt.

Sorry for the bandwidth, but there seems to be a fair about of interest in this topic. Hope this helps paint a clearer picture. de Doug KR2Q

Thursday, November 01, 2007

Narrow Band ALE announced

Credit QRZ.com


Patrick F6CTE
has announced that a narrow band version of the popular Automatic Link Establishment (ALE) software is now available.

On the HFLink Yahoo group he writes:

For those interested in doing ALE and ARQ FAE using a narrow bandwidth (400 Hz), I have derived from the standard ALE a new ALE with a bandwidth of 400 Hz (instead of 2000 Hz) and which is called 'ALE400'.

This ALE system has exactly the same functions as the standard ALE (in Multipsk) except that the:
• bandwidth is 400 Hz (so ALE400 can be used where 500 Hz modes are permitted)
• the speed (and consequently the text throughput) is 2.5 slower,
• no fix frequency (it is as MFSK16, Olivia or DominoEX modes)
• the S/N is 5 dB better:
- 9 dB for AMD messages and Unproto
- 11.5 dB (- 13.5 dB with many repetitions) for ARQ FAE

For ARQ FAE, it has been added a compression system using a modified IZ8BLY (Nino) MFSK Varicode. So the text throughput (in ALE400) is typically 60 wpm (up to 107 mpm in bilateral and 63 characters frames).

This test version in a ZIP test package is available in my site
http://f6cte.free.fr/MULTIPSK_TEST_28_10_2007.ZIP
(copy and paste this address in Internet Explorer (or equivalent) Net address field). It contains the Multipsk test version, the help files (in English and French) and the specifications (in English) of the ARQ FAE mode (version 1.4).

Create a temporary folder (C:\TEST, for example), unzip the files in it and start C:\TEST\TEST\Multipsk.exe (the auxiliary files will be created automatically).

For the contextual help, click on the right button of the mouse, with the focus over the mode button "ALE400". Use also the button hints (wait a fraction of second over a button).

Hints:
• if you are the "Master" (initiator of the CQ): confirm the RS ID transmission in "Options" (to permit an automatic tuning for other Hams), check "Master" on the Mode panel and, afterwards, push the button "CQ"
• if you are the "Slave" (the Ham who answers): push the button "RS ID detection" (to permit your automatic tuning on CQ), check "Slave" on the Mode panel and, afterwards, push the button "Answer".
Both will push on the "AFC" button.

Note: it rings on successful connexion (on both sides).

73
Patrick


Related URL’s

HFLink Yahoo Group
http://groups.yahoo.com/group/HFLink

HFLink
http://www.hflink.org/

MultiPSK Website
http://f6cte.free.fr/

ALE400 Software - A Test version has been available at
http://f6cte.free.fr/MULTIPSK_TEST_28_10_2007.ZIP
but like all test software it could be frequently updated.

Powered by Blogger